Feature:
Intelligent control class D amplifier
Cooling by aluminum panel without fan
SMPS power supply
Model: | PD500DSP-B |
Power Ratings(RMS@1%THD@230Vac) | 1x250w/8ohm |
Power Ratings(RMS@1%THD@230Vac) | 1x250w/4ohm |
Power Ratings(RMS@1%THD@230Vac) | 700w/2.6ohm,2ohm stable |
Frequency Response: | 20Hz-20KHz(±3dB) |
Input Sensitivity: | 1.0V |
Input Impedance: | 20KΩ 10KΩ |
Amplifier Gain | 26dB |
Damping Factor: | >550(8ohm load,1Hz or below) |
Signal To Noise-Ratio: | >80dB |
THD+N(typical): | <0.1 |
Working Voltage: | 85-265V,with PFC |
电源功耗/Power Consumption: | 9W |
Input and Output Connector: | 1xXLR female,1xXLR male 1xVolume,1xpreset, USB,RS-485 |
处理器DSP: | 1input 2 output 96KHz sample rate, fixed point DSP Phase,All past filter,12EQ, 1600ms delay,Crossover, Limiter,Driver free |
WIFI(Ethernet by TCP/IP): | selectable |
Dante: | selectable |
Metal Chassis: | selectable |
Dimensions(WxDxH): | 114x80x325mm |
Weight: | 1.2kg |