Feature:
Intelligent control class D amplifier
Cooling by aluminum panel without fan
SMPS power supply
Model: | PD3500DSP |
Power Ratings(RMS@1%THD@230Vac) | 3x250W/8ohm |
Power Ratings(RMS@1%THD@230Vac) | 3x500W/4ohm |
Power Ratings(RMS@1%THD@230Vac) | Bridged:1000W+250W/8ohm |
Power Ratings(RMS@1%THD@230Vac) | Bridged:1000W+300W/4ohm |
Power Ratings(RMS@1%THD@230Vac) | 2ohm stable |
Frequency Response: | 20Hz-20KHz(±3dB) |
Input Sensitivity: | 1.0V |
Input Impedance: | 20KΩ/10KΩ |
Amplifier Gain | 26dB |
Damping Factor: | >1000(8ohm load,1KHz or below) |
Signal To Noise-Ratio: | >120dB |
THD+N(typical): | <0.05(20Hz-20KHz 8ohm load) |
Working Voltage: | 85-265V,with PFC |
Power Consumption: | 12W |
Input and Output Connector: | 1xXLR female,1xXLR male 1xVolume,1xPreset,USB,RS-485,Ethernet |
DSP: | 2 input 4 output 96KHz sample rate, fixed point DSP Phase,All past filter,12 EQ, Crossover,Limiter Driver free,Ethernet by TCP/IP |
WIFI(Ethernet by TCP/IP): | selectable |
Dante: | selectable |
Metal Chassis: | selectable |
Dimensions(WxDxH): | 180x80x335mm |
Weight: | 2.5kg |